CB1ATTO3
Special Price Please call us on +44 (0)1386 554 210 for more details
Part no: CB1ATTO3
Simply connect and go, no complicated programming required.
The CB1ATTO3 CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from a BYD ATTO 3 vehicle.
Features built-in diagnostic LEDs to indicate CAN Bus status.
Applications:
Navigation systems – Taximeters – Cruise Control – Fleet Management – Parking Sensors – Motability – Speed limiters – Tachographs
- BYD ATTO 3
| Colour | I/O | Function |
|---|---|---|
| Black | I | Ground |
| Red | I | Power +12V regulated ignition controlled supply |
| Yellow | I | CAN High |
| Blue | I | CAN Low |
| Orange | O | Speed Pulse Output 12V |
| Frequency | Approx. 1Hz per mph |
| Output voltage | 12V square wave |
| Minimum speed | 1.7mph |
| Approx. pulse/mile | 3600 |
The CB1ATTO3 CAN Bus interface is designed to provide a vehicle speed signal signal from a BYD ATTO 3 CAN Bus system. It is programmed to automatically detect the vehicle type and it will give a frequency output of approximately 1Hz per mph.